Part# DMEMSREMBSET
These reinforced engine mount bushings are ideal for drifting, gymkhana, and racing competitions. By increasing the rubber hardness of the rubber, which is too weak in the stock engine mount bushings , vibrations during acceleration/deceleration, braking, and cornering are reduced, engine tilt is suppressed, and the shift feel is improved by directly receiving the transmission's intended movement, resulting in improved cornering performance. Furthermore, because this product has increased hardness compared to the stock reinforced part, the engine mounting position will be +4-6mm higher than the stock mount, including manufacturing tolerances. However, it will not interfere with the hood and can be installed without modification simply by replacing the stock part.
Rubber Hardness
Comparison: NISSAN Stock Part vs. Reinforced Part
Our products +5 to 7%
Engine mounting position (compared to genuine part) *2
Our products +3 to 5 mm
Compatible Vehicle Models/Types/Engine Types
Silvia/180SX (R)PS13/S13/S14/S15 SR20DET/SR20DE
*1 This value is based on a test comparison using our company's hardness meter. + indicates increased hardness.
*2 This value is based on a test comparison using our company's equipment. + indicates a higher position than the genuine part.
*Compared to the genuine NISSAN part, this part puts more stress on the engine mount, so we recommend reinforcing the body and mount.
*Because the rubber hardness is higher than the genuine part, the engine mounting position will be higher, which may cause interference with strut bars or aftermarket hoods.
*Compared to the genuine part, engine vibrations will be transmitted more easily into the cabin, so please be aware that interior trim may rattle.
Part# DMEMSREMBSET
These reinforced engine mount bushings are ideal for drifting, gymkhana, and racing competitions. By increasing the rubber hardness of the rubber, which is too weak in the stock engine mount bushings , vibrations during acceleration/deceleration, braking, and cornering are reduced, engine tilt is suppressed, and the shift feel is improved by directly receiving the transmission's intended movement, resulting in improved cornering performance. Furthermore, because this product has increased hardness compared to the stock reinforced part, the engine mounting position will be +4-6mm higher than the stock mount, including manufacturing tolerances. However, it will not interfere with the hood and can be installed without modification simply by replacing the stock part.
Rubber Hardness
Comparison: NISSAN Stock Part vs. Reinforced Part
Our products +5 to 7%
Engine mounting position (compared to genuine part) *2
Our products +3 to 5 mm
Compatible Vehicle Models/Types/Engine Types
Silvia/180SX (R)PS13/S13/S14/S15 SR20DET/SR20DE
*1 This value is based on a test comparison using our company's hardness meter. + indicates increased hardness.
*2 This value is based on a test comparison using our company's equipment. + indicates a higher position than the genuine part.
*Compared to the genuine NISSAN part, this part puts more stress on the engine mount, so we recommend reinforcing the body and mount.
*Because the rubber hardness is higher than the genuine part, the engine mounting position will be higher, which may cause interference with strut bars or aftermarket hoods.
*Compared to the genuine part, engine vibrations will be transmitted more easily into the cabin, so please be aware that interior trim may rattle.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5